Key Features
Dry and Wet Milling in One Machine
Process a wider range of dental milling materials without choosing a separate dry-only or wet-only mill. The required process, burs and fixture depend on the selected material.
5-Axis Milling Mechanism
The rotary axes allow multi-angle machining, with A-axis rotation of ±360° and B-axis motion from −30° to +90°. Confirm the CAM toolpath strategy for your restorations.
60,000 rpm, 2.5 kW Spindle
A high-speed, water-cooled spindle provides the cutting platform for the mill’s supported dry and wet material workflows.
18-Position Automatic Tool Changer
Automatic tool changing reduces manual tool replacement during programmed milling sequences. Tool-wear monitoring is also listed; confirm its software configuration when ordering.
Automated Calibration and Remote Monitoring
Automatic probe calibration and a built-in camera support setup and remote observation of milling progress. Confirm network and software requirements for your installation.
Material-Specific Fixtures and Drainage Design
C-clamp, block-holder and premilled-abutment holder types are listed for different blanks. A hydrophobic drainage design is described for water management during wet operation.
Milling Materials and Dental Applications
The UMH-8PRO is specified for the following materials. Match each blank to the appropriate holder, cutting tools and CAM workflow before production.
| Material | Purchasing / Workflow Considerations |
|---|---|
| Zirconia | Confirm disc size, thickness, appropriate dry-milling tools and the restoration design. |
| Lithium disilicate | Confirm supported blanks and the appropriate wet-milling process for restorations such as crowns, inlays/onlays and veneers. |
| Titanium | Confirm grade, blank form, tooling and fixture requirements for the intended dental restoration. |
| PMMA | Confirm milling blank dimensions, tool selection and processing settings. |
| PEEK | Confirm the particular dental blank and the recommended milling parameters. |
| Wax | Confirm blank dimensions and milling tools for the laboratory workflow. |
Applications listed for the UMH-8PRO include crowns, bridges, veneers, inlays/onlays, abutments and screw-retained bridges. The restorations supported in a particular order depend on the material, blank geometry, fixture and CAM workflow.
Fixture Options
- Standard C-Clamp: intended for compatible disc-format dental milling materials.
- Block Holder: intended for compatible block-format milling blanks.
- Premilled Abutment Holder: intended for suitable premilled blanks and implant-restoration workflows.
These are listed holder types, not a confirmed standard accessory package. Ask for an itemized list of included and optional fixtures.
UMH-8PRO Technical Specifications
| Parameter | UMH-8PRO |
|---|---|
| Number of axes | 5 |
| Processing method | Dry and wet milling |
| Listed materials | Zirconia, PMMA, PEEK, wax, lithium disilicate, titanium |
| Material thickness | 10–25 mm (as listed in brochure) |
| X / Y / Z working travel | 160 / 115 / 105 mm |
| A-axis angular range | ±360° |
| B-axis angular range | −30° to +90° |
| Spindle speed | 60,000 rpm |
| Spindle power | 2.5 kW |
| Spindle collet | Ø6 mm |
| Spindle cooling | Water cooling |
| Tool positions | 18 |
| Control system | Embedded multi-axis CNC system with servo motors |
| Total rated power | 3.7 kW |
| Power supply | Single-phase AC 220 V, 50/60 Hz |
| Required compressed-air pressure | 6 bar |
| Water tank capacity | 10 L |
| Overall dimensions (W × D × H) | 525 × 700 × 784 mm |
| Machine weight | 150 kg |
Confirm the quoted machine configuration and installation drawings before placing an order.
Preparing Your Dental Laboratory
Before installing the UMH-8PRO, confirm that your workspace and production process meet the machine’s utility and material-handling requirements:
- Power: Single-phase 220 V, 50/60 Hz supply with installation capacity appropriate for the published 3.7 kW rating.
- Compressed air: 6 bar supply; request further guidance on air quality, flow and fittings.
- Water and cleaning: Plan for the 10 L water tank and material-specific wet-milling cleaning and drainage procedures.
- Machine placement: Allow room for a 525 × 700 × 784 mm, 150 kg machine plus operator access, tool changes and service clearance.
- Digital workflow: Verify CAD design files, CAM software/post-processor compatibility, networking and monitoring arrangements.
- Consumables: Agree on starter burs, holders, compatible blanks, maintenance parts and the dry/wet cleaning procedure.
What to Confirm Before Ordering
For an accurate quotation, specify the main restoration materials, the blank formats you use, expected daily production volume and any existing CAD/CAM software. Ask for a written configuration covering:
- Machine, water system and any air or filtration accessories included in the offer
- C-clamp, block holder and premilled-abutment holder: included versus optional quantities
- Compatible dental blanks, burs and recommended tool sets for zirconia, glass ceramic and titanium
- Supported CAM software, post-processor and license terms; availability of monitoring and tool-wear functions
- Training, maintenance, replacement tooling, warranty, packing and shipping terms
Frequently Asked Questions
Can the UMH-8PRO mill both zirconia and titanium?
Both are included in the brochure’s list of machinable materials. Confirm blank compatibility, tool selection and the appropriate machining process for each.
Does it support dry and wet processing?
Yes. The product is specified for dry and wet milling. Material-specific milling procedures, cleaning arrangements and required accessories should be confirmed before installation.
Are the three holder types included?
The listed holder types are a C-clamp, block holder and premilled-abutment holder. Please ask which are included in your quotation.
Which CAD/CAM programs work with the machine?
Please share your current CAD/CAM software and file workflow. UMY can check the appropriate CAM integration and post-processor requirements for your installation.
What information should I send for a quote?
Please include your destination country, required materials and restorations, blank/holder requirements, expected production volume, software workflow and preferred delivery terms.
Related Dental Equipment
For other equipment used in dental laboratory and clinic projects, see UMY Medical’s Dental Equipment category. Dental imaging, milling and chairside treatment systems serve different stages of the digital dental workflow.
Request a UMH-8PRO Quotation
Tell us which dental materials you work with, your preferred blank formats and your destination country. UMY Medical can review the milling machine, tooling and fixture options for your inquiry.
Reviews
There are no reviews yet.