UMIASN001 48-Slide Immunohistochemistry Stainer
The UMIASN001 is an automated immunohistochemistry staining system designed for pathology and histology laboratories that require programmable, repeatable slide staining workflows. The system accommodates up to 48 slides and 64 reagent positions, with reagent dispensing starting from 50 µL.
An open-system design allows laboratories to build user-defined staining protocols and work with compatible user-selected reagents instead of relying on a single proprietary reagent platform. Windows-based programming, password protection, reagent volume checks and stored reports support routine IHC laboratory workflow management.
Key Features
48-Slide Staining Capacity
The staining platform accommodates up to 48 slides in a single system, supporting routine pathology and immunohistochemistry workloads.
64 Reagent Positions
A 64-position reagent capacity provides flexibility for laboratories running multiple antibodies, detection reagents and customized staining protocols.
Open Reagent System
The open-system architecture allows laboratories to configure user-selected reagents and protocols instead of depending exclusively on proprietary reagent kits.
Programmable IHC Protocols
Windows-based software enables users to create and manage staining protocols according to laboratory workflow and specimen requirements.
50 µL Minimum Reagent Dispensing
Reagent dispensing starts from 50 µL, with selectable dispensing increments of 50, 100, 150 and 200 µL.
Walk-Away Operation
Programmable operation allows staining runs to continue with reduced manual intervention, including extended and overnight workflows where the selected protocol permits.
How the IHC Autostainer Works
The UMIASN001 automates the reagent-handling portion of slide staining through a programmable staining platform. Slides are arranged in the staining area while the required reagents are loaded into the reagent positions according to the selected protocol.
The operator selects or creates a staining protocol in the Windows-based control software. The system then follows the programmed sequence and reagent-volume settings, applying controlled reagent volumes to the designated slides during the staining run.
This approach reduces repetitive manual reagent application and helps laboratories standardize staining steps across repeated runs. Per-run reagent volume checks and stored process reports provide additional workflow traceability.
Note: pretreatment steps such as fixation, deparaffinization, antigen retrieval or other preparation procedures should be confirmed according to the laboratory protocol and final system configuration. They should not be assumed to be integrated functions of the UMIASN001 unless specifically confirmed.
Open-System IHC Workflow
The open-system design is one of the main advantages of the UMIASN001. Laboratories can configure their own staining protocols and compatible reagents according to internal procedures and assay requirements.
- User-defined staining protocols.
- User-selected compatible reagents.
- Multiple staining runs according to laboratory workload.
- Reduced dependence on proprietary reagent platforms.
- Password-protected programming environment.
- Stored staining and process reports.
Reagent Management and Dispensing
The reagent system accommodates up to 64 reagent positions and supports controlled dispensing volumes for different staining protocols.
| Reagent Capacity | 64 Positions |
|---|---|
| Minimum Dispensing Volume | 50 µL |
| Available Dispensing Increments | 50 µL / 100 µL / 150 µL / 200 µL |
| Reagent Volume Check | Per-Run Reagent Volume Checking |
| Reagent System | Open / User-Configured |
| Disposable Pipette Tips | Not Required by the Listed System Design |
The absence of disposable pipette tips can reduce dependence on dedicated dispensing consumables. Actual reagent and other laboratory consumable requirements depend on the selected staining protocol.
Slide Capacity and Workflow
| Slide Capacity | 48 Slides |
|---|---|
| Primary Application | Immunohistochemistry (IHC) |
| Additional Listed Application | HE and Other Compatible Slide-Staining Protocols |
| Protocol Type | User Programmable |
| Operation | Programmable Walk-Away Workflow |
| Report Storage | Supported |
Windows-Based Staining Software
The UMIASN001 uses a Windows-based programming environment for staining workflow setup and protocol management.
- Create and edit user-defined staining protocols.
- Password protection for controlled access.
- Manage staining workflow parameters.
- Store detailed run reports.
- Support multiple daily staining runs.
- Multiple compatible stainers can be managed from a single computer according to the supplied system design.
Designed for Pathology Laboratory Workflow
The system is intended to reduce repetitive manual handling during immunohistochemistry staining while providing laboratories with flexibility over protocols and reagents.
Its 48-slide capacity makes it suitable for laboratories processing multiple tissue sections within routine diagnostic, research or teaching workflows.
- Hospital pathology laboratories.
- Histopathology laboratories.
- Immunohistochemistry laboratories.
- Medical research laboratories.
- University and teaching laboratories.
- Laboratories performing compatible automated slide-staining workflows.
Technical Specifications
| Model | UMIASN001 |
|---|---|
| Product Type | Immunohistochemistry Stainer / IHC Autostainer |
| Slide Capacity | 48 Slides |
| Reagent Capacity | 64 Positions |
| Minimum Reagent Dispensing | 50 µL |
| Reagent Dispensing Increments | 50 µL / 100 µL / 150 µL / 200 µL |
| Maximum Output Power | ≤350 VA |
| Working Noise | ≤60 dB(A) |
| Listed Application | IHC, HE and Other Compatible Protocols |
| Dimensions | 1015 × 665 × 520 mm |
| Power Supply | 220 V or 110 V |
| Rated Current | 1.6 A |
| Net Weight | 116 kg |
Packing Information
| Net Weight | 116 kg |
|---|---|
| Gross Weight | 158 kg |
| Packing | Wooden Case |
| Listed Packing Dimensions | 1100 × 750 × 710 mm / 810 × 510 × 560 mm |
The supplied documentation lists two packing dimensions. Final packing arrangement and shipping dimensions should be reconfirmed before preparing freight quotations.
Product Configuration Notes
The final UMIASN001 configuration should be confirmed according to the laboratory’s staining protocols, reagent system and workflow requirements.
- Confirm required IHC staining protocols.
- Confirm antibody and reagent bottle requirements.
- Confirm laboratory voltage: 110 V or 220 V.
- Confirm required computer and software configuration.
- Confirm laboratory network and data-management requirements.
- Confirm whether multiple staining systems will be controlled from one workstation.
- Confirm required training and protocol setup support.
Before Ordering
To help UMY Medical confirm the appropriate IHC staining configuration and prepare an accurate quotation, please provide the following information.
- Required quantity.
- Destination country.
- Expected daily slide volume.
- Main staining applications.
- Required antibodies and reagent workflow.
- Whether existing laboratory reagents must be retained.
- Required power supply.
- Computer and software requirements.
- Installation and operator-training requirements.
- Local registration, tender or documentation requirements.
Frequently Asked Questions
What is the slide capacity of the UMIASN001 IHC stainer?
The UMIASN001 accommodates up to 48 slides.
How many reagent positions are available?
The system provides up to 64 reagent positions.
What is the minimum reagent dispensing volume?
The minimum listed reagent dispensing volume is 50 µL, with selectable increments of 50, 100, 150 and 200 µL.
Is the UMIASN001 an open-system IHC stainer?
Yes. The supplied product information describes it as an open system that supports user-defined protocols and compatible user-selected reagents.
Does it require disposable pipette tips?
The supplied system description states that disposable pipette tips are not required by the dispensing design.
Can laboratories create their own staining protocols?
Yes. Windows-based programming supports user-specified protocols and password-protected workflow configuration.
Is this a fully automatic IHC stainer?
The UMIASN001 provides automated reagent dispensing and programmable walk-away staining workflows. However, the exact scope of upstream and downstream preparation steps should be confirmed for each protocol before describing the system as fully automated from slide preparation through final counterstaining.
Reviews
There are no reviews yet.