UMIP004 1200 mL/h Medical Infusion Pump

UMIP004 Medical Infusion Pump

The UMIP004 is a medical infusion pump designed for controlled intravenous fluid and medication delivery
in hospitals, intensive care units, emergency departments, operating rooms, general wards, and other
clinical environments.

The pump supports a flow rate range of 1–1200 mL/h and multiple infusion modes for different treatment
requirements. Ultrasonic air-bubble detection, downstream occlusion monitoring, adjustable infusion
parameters, and rechargeable battery operation support routine and continuous infusion workflows.

Key Features

• Flow Rate up to 1200 mL/h:
  Supports adjustable infusion rates from 1 mL/h up to 1200 mL/h according to the selected infusion set and configuration.
• Multiple Infusion Modes:
  Supports Volume Mode, Time Mode, and Drug Mode for different clinical infusion workflows.
• Ultrasonic Air-Bubble Detection:
  Uses ultrasonic detection to identify air bubbles in the infusion line and generate an alarm when required.
• Downstream Occlusion Monitoring:
  Monitors downstream pressure conditions to help identify blocked or restricted infusion lines.
• 3.2-Inch LCD Display:
  Displays infusion rate, volume, operating status, alarm information, and related parameters.
• Numeric Keypad:
  Allows direct entry of infusion parameters for routine clinical operation.
• Standard IV-Set Compatibility:
  Designed for use with compatible standard infusion sets after correct calibration and setup.
• KVO Function:
  Supports adjustable keep-vein-open operation to maintain a low infusion rate after completion of the programmed infusion.
• Rechargeable Battery Operation:
  Internal rechargeable lithium battery supports continued operation during patient transfer or temporary AC power interruption.
• Clinical Safety Alarms:
  Provides audible and visual alarms for abnormal operating conditions according to the supplied configuration and software version.

Typical Applications

The UMIP004 is suitable for controlled IV infusion where accurate adjustment of flow rate, infusion volume,
treatment time, and safety monitoring are required.

• Intensive care units
• Emergency departments
• Operating rooms
• General hospital wards
• Internal medicine departments
• Postoperative care
• Infusion and treatment rooms
• Patient transfer and mobile clinical use

Infusion Modes

The UMIP004 provides multiple operating modes to support different infusion planning requirements.
Available functions should be used according to the prescribed treatment plan and hospital protocol.

• Volume Mode:
  Allows the operator to set the target infusion volume and corresponding delivery parameters.
• Time Mode:
  Supports infusion according to a programmed treatment duration and volume requirement.
• Drug Mode:
  Supports medication-related infusion parameter setup according to the configured workflow.

IV Set Compatibility and Calibration

The UMIP004 is designed for use with compatible standard IV infusion sets. Because tubing dimensions,
elasticity, and drop factors can vary between manufacturers, the selected infusion set should be correctly
configured and calibrated before clinical use.

Compatible drop factors may include commonly used 10, 15, 20, and 60 drops/mL infusion sets depending on
configuration. Buyers should confirm the IV-set brands and specifications intended for routine use before ordering.

Air-Bubble and Occlusion Monitoring

Ultrasonic air-bubble detection monitors the infusion line for the presence of air during operation.
The specified platform may detect air bubbles from approximately 50 μL, depending on the exact hardware
and software configuration.

Downstream occlusion monitoring helps identify excessive pressure caused by a blocked or restricted infusion line.
Alarm thresholds, pressure levels, and response behavior should be confirmed from the supplied operating manual.

Exact alarm types and trigger conditions may vary by version and should be checked before clinical deployment.

Technical Specifications

Power and Battery Operation

The UMIP004 supports mains-powered clinical operation together with an internal rechargeable lithium battery
for temporary mobile use and continued operation during power interruption or patient transfer.

Public versions of this infusion-pump platform use different battery capacities and therefore have different
stated operating times. Final battery capacity, charging time, and expected runtime should be confirmed for the
exact supplied UMIP004 configuration.

Before Ordering

Infusion-pump performance depends on correct IV-set selection, calibration, software configuration,
and alarm setup. To prepare the correct configuration and quotation, please confirm the following
information before ordering:

• Required quantity
• Destination country
• Local voltage and plug type
• IV-set brand and tubing specification
• Required flow-rate range
• Required infusion modes
• Required KVO settings
• Required air-bubble detection settings
• Occlusion-pressure requirements
• Battery-runtime requirements
• Required mounting accessories or IV-pole installation
• Required regulatory and import documentation

Because IV-set tubing characteristics vary between manufacturers, buyers should provide the intended
infusion-set brand and specification so compatibility and calibration can be checked before shipment.

Request a Quote for the UMIP004 Infusion Pump

Send UMY Medical your required quantity, destination country, IV-set specification, flow-rate requirements,
power requirements, and intended clinical application. Our team can confirm the available configuration,
accessories, documentation, lead time, and quotation.

Email:
[email protected]
WhatsApp / Tel:
+86 199 2588 4840

Contact UMY Medical

UMIP004 Infusion Pump FAQ

What is the flow rate range of the UMIP004?

The specified flow rate range is 1–1200 mL/h. The actual available range and delivery performance depend
on the selected IV set, calibration, and operating configuration.

What infusion modes does the UMIP004 support?

The specified configuration supports Volume Mode, Time Mode, and Drug Mode for different infusion workflows.
Additional software functions may vary by supplied version.

Does the UMIP004 detect air bubbles and occlusions?

Yes. The pump uses ultrasonic air-bubble detection and downstream occlusion monitoring.
Detection thresholds and alarm behavior should be confirmed according to the supplied configuration and operating manual.

What information should I provide before ordering?

Please provide the required quantity, destination country, voltage, IV-set brand and specification,
required flow rate, infusion modes, battery requirements, mounting accessories, and required regulatory
or import documentation.