UMIFIB002 Infant Incubator
The UMIFIB002 infant incubator is designed for neonatal care environments requiring controlled thermal support, continuous temperature monitoring and multiple safety alarms. The system provides both air temperature and skin temperature servo control with real-time display of operating parameters.
The incubator integrates six access ports, IV poles, protective guard rails, RS-232 connectivity and storage cabinets in a mobile bedside unit for routine neonatal care workflows.
Key Features
Air and Skin Servo Control
Dual servo control supports both air temperature and skin temperature regulation according to the selected operating mode.
Real-Time Parameter Display
The control panel displays set temperature, air temperature, skin temperature and heating power information during operation.
Audible and Visual Alarms
The system provides alarms for power failure, fan failure, sensor failure, high and low temperatures, over-temperature conditions and system faults.
>37°C Preset Mode
The incubator includes a temperature override mode above 37°C together with alarm silence, keypad lock, self-test and power-failure reset memory functions.
Six Access Ports
The dual-slope transparent hood includes six operating ports, including two iris ports, to support routine infant care and access.
RS-232 Connectivity
An RS-232 output connector is provided for connection with compatible network or monitoring systems.
Infant Care Hood
The transparent dual-slope hood provides direct observation of the infant while allowing access through multiple hand ports and tubing grommets.
| Mattress to Hood Height | 450 mm |
|---|---|
| Hood Design | Dual-Slope / Two-Incline Observation Sides |
| Operating Ports | 6, including 2 iris ports |
| Tubing Grommets | 4 |
| Front Access Panel | 826 × 310 mm |
| Mattress Tray Size | 630 × 360 mm |
| Infant Bed Tilt | ±10° stepless adjustment |
Temperature Control
The UMIFIB002 uses air and skin servo control to maintain the selected thermal environment. The system continuously monitors temperature-related parameters and provides dedicated over-temperature protection and alarm functions.
| Temperature Control Mode | Air Servo Control / Skin Servo Control |
|---|---|
| Air Temperature Control Range | 20°C – 37°C |
| Air Temperature Override Mode | Up to 39°C |
| Skin Temperature Control Range | To be confirmed before publication |
| Skin Temperature Override Mode | Up to 38°C |
| Skin Temperature Sensor Accuracy | ≤0.3°C |
| Temperature Fluctuation | ≤0.5°C |
| Mattress Temperature Uniformity | ≤0.8°C |
| Temperature Rise Time | ≤45 min |
| Noise Level Inside Hood | ≤55 dB |
Safety Alarm System
- Power failure alarm.
- Fan failure alarm.
- Sensor failure alarm.
- High air temperature alarm: +3.0°C.
- Low air temperature alarm: -3.0°C.
- High skin temperature alarm: +1.0°C.
- Low skin temperature alarm: -1.0°C.
- Air over-temperature alarm.
- Skin over-temperature alarm.
- System failure alarm.
- Alarm silence function.
Standard Configuration
- Air temperature servo control.
- Skin temperature servo control.
- Six canopy access ports.
- Stepless infant-bed tilt adjustment.
- Protective guard rail.
- Integrated storage cabinets.
- >37°C temperature override mode.
- Alarm silence function.
- System alarm functions.
- RS-232 output connector.
- IV poles.
Optional Accessories
Additional accessories and configurations are available for the infant incubator series. Final availability for the UMIFIB002 should be confirmed when requesting a quotation.
| Double-Wall Canopy | Optional configuration |
|---|---|
| Blue Light Phototherapy Unit | Available with LED digital timer configuration |
| Dual-Side Phototherapy | Upper and lower blue-light configuration available |
| Infant Scale | Optional infant weighing system |
| X-Ray Tray | Optional tray for X-ray film placement |
| Electric Height Adjustment | Optional configuration |
Technical Specifications
| Model | UMIFIB002 |
|---|---|
| Product Type | Infant Incubator |
| Power Requirement | ≤400 VA |
| Control Modes | Air and Skin Servo Control |
| Air Temperature Range | 20°C – 37°C |
| Air Temperature Override | Up to 39°C |
| Skin Temperature Sensor Accuracy | ≤0.3°C |
| Temperature Fluctuation | ≤0.5°C |
| Mattress Temperature Uniformity | ≤0.8°C |
| Temperature Rise Time | ≤45 min |
| Noise Level | ≤55 dB |
| Operating Environment Temperature | 20°C – 30°C |
| Operating Relative Humidity | To be confirmed |
| Maximum Air Velocity | <0.3 m/s |
| Infant Bed Tilt | ±10° Stepless |
| Mattress Tray Maximum Load | To be confirmed |
| IV Pole Maximum Load | 2 kg |
| Cabinet Maximum Load | 6 kg |
| Data Interface | RS-232 |
Before Ordering
Please provide the following information so the final incubator configuration and quotation can be confirmed.
- Required quantity.
- Destination country and delivery location.
- Required power supply standard.
- Required optional accessories.
- Whether phototherapy, infant weighing or X-ray tray functions are required.
- Required hospital network or data interface configuration.
- Local registration, tender or documentation requirements.
Frequently Asked Questions
Does the UMIFIB002 support both air and skin temperature control?
Yes. The UMIFIB002 provides both air servo control and skin servo control.
How many access ports are included?
The hood includes six operating ports, including two iris ports.
Does the infant incubator provide safety alarms?
Yes. The system provides audible and visual alarms for power failure, fan failure, sensor failure, temperature deviation, over-temperature and system failure conditions.
Can the infant bed be tilted?
Yes. The infant bed supports ±10° stepless tilt adjustment.
Can the incubator connect to a hospital network?
An RS-232 output connector is provided. Final compatibility with the hospital’s monitoring or network system should be confirmed before ordering.
What optional accessories are available?
The product series offers options including a double-wall canopy, blue-light phototherapy, infant scale, X-ray tray and electric height adjustment. Availability for the UMIFIB002 should be confirmed with the final quotation.
Reviews
There are no reviews yet.