UMH-V3 2.8-Inch Compact Infusion Pump

UMH-V3 Compact Infusion Pump

The UMH-V3 is a compact medical infusion pump designed for controlled intravenous fluid
and medication delivery in hospitals, intensive care units, emergency departments,
operating rooms, general wards, and patient-transfer environments.

The system combines a 2.8-inch color TFT display with a 0.1–2000 mL/h flow-rate range,
configurable IV-set calibration, dynamic pressure monitoring, adjustable air-bubble
detection, multiple infusion modes, and rechargeable battery operation.

Key Features

• Compact 2.8-Inch Color Display:
  Provides infusion parameters, operating status, pressure information, and alarm messages
  in a compact clinical format.
• Flow Rate up to 2000 mL/h:
  Supports an adjustable flow range from 0.1 to 2000 mL/h with a minimum rate increment
  of 0.01 mL/h.
• Multiple Infusion Modes:
  Standard modes support rate, time, body-weight, drip, and micro infusion workflows.
• Optional Advanced Modes:
  Sequence and drug-library functions are available depending on the supplied software configuration.
• Editable IV-Set Library:
  Supports compatible standard IV sets with storage for up to 200 editable IV-set brand configurations.
• Parameter Adjustment During Infusion:
  Selected settings such as flow rate, volume, air-bubble level, and occlusion level can be adjusted
  without stopping an ongoing infusion, depending on the operating mode.
• Dynamic Pressure Monitoring:
  Graphic and numeric pressure information supports real-time observation of infusion-line pressure.
• 4-Level Occlusion Pressure:
  Provides four selectable pressure settings across approximately 150–900 mmHg.
• Adjustable Air-Bubble Detection:
  Air-in-line detection sensitivity can be configured according to the infusion setup.
• Anti-Bolus Function:
  Designed to reduce unintended bolus delivery after an occlusion condition is released.
• Standard and Optional Battery Configurations:
  Standard battery operation supports more than 5 hours at 25 mL/h, while an optional dual-battery
  configuration can provide more than 10 hours under specified test conditions.
• IP44 Protection:
  Compact PBT+PC enclosure with IP44-rated protection for clinical and transport applications.

Typical Applications

The UMH-V3 is suitable for controlled IV infusion where adjustable flow rate, programmable infusion modes,
pressure monitoring, and compact equipment size are required.

• Intensive care units
• Emergency departments
• Operating rooms
• General hospital wards
• Postoperative care
• Infusion and treatment rooms
• Internal medicine departments
• Patient-transfer and mobile clinical applications

Infusion Modes

The UMH-V3 supports multiple infusion modes for different clinical workflows. Standard functions include
rate-based, time-based, body-weight, drip, and micro infusion modes.

• Rate Mode:
  Delivers infusion according to the programmed flow rate.
• Time Mode:
  Supports infusion according to programmed treatment time and target volume.
• Body-Weight Mode:
  Supports dose calculations based on configured patient-weight and drug parameters.
• Drip Mode:
  Supports workflows based on compatible infusion-set drop factors.
• Micro Mode:
  Provides parameter settings intended for low-rate infusion applications.
• Sequence Mode:
  Available on selected software configurations for programmed multi-step infusion.
• Drug Library Mode:
  Available depending on software configuration. Drug-library content and available functions
  should be confirmed before ordering.

IV Set Compatibility and Calibration

The UMH-V3 is designed for use with compatible standard IV infusion sets. Because tubing dimensions,
elasticity, and flow characteristics differ between manufacturers, the selected IV set should be
correctly calibrated before clinical use.

The system can store up to 200 editable IV-set brand configurations, allowing frequently used infusion
sets to be saved for routine workflows.

Buyers should provide the intended IV-set brands and specifications before ordering so that compatibility
and calibration requirements can be reviewed.

Pressure Monitoring and Safety Functions

The UMH-V3 provides dynamic pressure monitoring with both graphic and numeric pressure information.
Four selectable occlusion-pressure levels cover approximately 150 mmHg to 900 mmHg.

Adjustable air-bubble detection supports different infusion-line configurations, while an anti-bolus
function is designed to reduce unintended fluid delivery after release of an occlusion.

Alarm functions, detection thresholds, and response behavior depend on the supplied software and hardware
configuration and should be confirmed from the operating manual before clinical deployment.

Technical Specifications

Battery and Patient-Transfer Operation

The UMH-V3 supports AC mains power, external DC input, and rechargeable battery operation,
allowing the pump to be used at the bedside and during temporary patient transfer.

The standard single-battery configuration provides more than 5 hours of operation at 25 mL/h
under specified test conditions. An optional dual-battery configuration can extend stated
operating time to more than 10 hours under the same type of test condition.

Actual battery runtime depends on battery condition, flow rate, display usage, alarm activity,
operating temperature, and other operating conditions.

Before Ordering

Infusion-pump functions can vary by software, battery configuration, IV-set calibration,
mounting accessories, and destination-market requirements. Please confirm the following
information before ordering:

• Required quantity
• Destination country
• Local voltage and plug type
• IV-set brands and tubing specifications
• Required flow-rate range
• Required infusion modes
• Need for Sequence mode
• Need for Drug Library mode
• Required air-bubble detection settings
• Required occlusion-pressure settings
• Standard or dual-battery configuration
• External DC power requirements
• Pole clamp and mounting requirements
• Patient-transfer or ambulance application requirements
• Required regulatory and import documentation

If CE documentation, EN 1789-related documentation, or other market-specific certificates
are required, please provide the destination country so the current applicable documentation
can be confirmed before quotation.

Request a Quote for the UMH-V3 Infusion Pump

Send UMY Medical your required quantity, destination country, IV-set specification,
required infusion modes, battery configuration, and intended clinical application.
Our team can confirm the available configuration, accessories, documentation,
lead time, and quotation.

Email:
[email protected]
WhatsApp / Tel:
+86 199 2588 4840

Contact UMY Medical

UMH-V3 Infusion Pump FAQ

What is the flow rate range of the UMH-V3?

The UMH-V3 supports a specified flow rate range of 0.1–2000 mL/h with a minimum adjustment
increment of 0.01 mL/h. Actual infusion performance depends on IV-set selection,
calibration, and operating configuration.

What infusion modes are available on the UMH-V3?

Standard modes include rate, time, body-weight, drip, and micro infusion workflows.
Sequence and drug-library functions are available depending on the supplied software configuration.

How long can the UMH-V3 operate on battery power?

The standard single-battery configuration supports more than 5 hours of operation at 25 mL/h
under specified test conditions. An optional dual-battery configuration can provide more than
10 hours under similar conditions.

What should be confirmed before ordering the UMH-V3?

Buyers should confirm IV-set brands, required infusion modes, optional software functions,
air-bubble and occlusion settings, battery configuration, power requirements, mounting accessories,
destination country, and required regulatory documentation before ordering.